help configure the exores ruler

[jaguaraci]

I don't know if I'm in the right place, but I wanted help adding the sensor to the express ruler jh APT-100https://pt.aliexpress.com/item/4000986086865.html?spm=a2g0o.order_list.order_list_main.10.5542caa4qXFpyx&gatewayAdapt=glo2bra

[admin]

For example, for the range 1v/100psi

[jaguaraci]

The device has three speeds. 1. (corresponds to RAN red light) -15 to 500psi (34.5bar) 1V/100psi (6.89bar) Maximum Voltage/V Minimum Voltage/V Maximum Pressure/psi Minimum Pressure/psi 4.7 -0.13 500 -15 2. (corresponds to RAN green light) -15 to 50psi(3.45bar) 1V/10psi(0.689bar) Maximum Voltage/V Minimum Voltage/V Maximum Pressure/psi Minimum Pressure/psi 4.7 -0.13 50 -15 Suitable for vacuum testing. 3. (corresponds to RAN blue light) -2.5 to 5psi(0.345bar) 1V/1psi(0.0689bar) Maximum Voltage/V Minimum Voltage/V Maximum Pressure/psi Minimum Pressure/psi 4.7 -0.13 5 -2.

segundo o fabricante

[jaguaraci]

segundo o fabricante
The device has three speeds.
1. (corresponds to RAN red light) -15 to 500psi (34.5bar) 1V/100psi (6.89bar) Maximum Voltage 4.7/V Minimum Voltage -0.13/V Maximum Pressure 500/psi Minimum Pressure-15/psi

2. (corresponds to RAN green light) -15 to 50psi(3.45bar) 1V/10psi(0.689bar) Maximum Voltage4.7/V Minimum Voltage -0.13/V Maximum Pressure 50/psi Minimum Pressure -15/psi Suitable for vacuum testing.

3. (corresponds to RAN blue light) -2.5 to 5psi(0.345bar) 1V/1psi(0.0689bar) Maximum Voltage 4.7/V Minimum Voltage -0.13/V Maximum Pressure 5/psi Minimum Pressure -2.5/psi